AMX APEX Destiny 6100 Dokumentacja Strona 75
- Strona / 84
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
75
Control Channel Options 4:
Flash: Enabling the flash option will flash a selected relay and/or X-10 output. Use this option
with caution, due to the speed of X-10 do not flash several X-10 devices at one time.
Test all uses of X-10 flash before finishing an install to ensure desirable results.
Note: When using flash with filters unexpected results my occur. Filters "freeze" all
channels when a filter condition occurs. The drawback of this feature is as follows:
A channel is programmed for: "disable when disarm"
The panel is armed to AWAY and a user activates the channel from Remote Control
The device continues to flash until the panel is disarmed
The device stops flashing and freezes in its current state (off or on)
The panel is rearmed and the device begins flashing again
This side effect will make it undesirable to use flash with filters in most instances.
Preset Dim: When the channel is automatically (does not apply to user activations from local or
remote phone) activated, the X-10 device will turn on to full bright and lower to the
selected dim level. Legal values are 001 (full on) - 006 (very dim). This option is not
available if chain channel is selected.
All House Code On / Off: This option will turn an entire house code on and off. The house code of the unit in the
"CHU / chain" location determines the house code. This option is not available if
dimming or chain channel options are selected.
Disable: light (sunrise): Prevents the processing of ALL On/Off signals by a control channel when a sunrise/
sunset zone shows "light."
Disable: dark (sunset): Prevents the processing of ALL On/Off signals by a control channel when a sunrise/
sunset zone shows "dark."
Disable: HOME or Night: Prevents the processing of ALL On/Off signals by a control channel when the panel is
armed to HOME or Night. This filter is not available if Split Arming is enabled.
Disable: AWAY: Prevents the processing of ALL On/Off signals by a control channel when the panel is
armed to AWAY. This filter is not available if Split Arming is enabled.
Disable: Disarmed: Prevents the processing of ALL On/Off signals by a control channel when the panel is
disarmed. This filter is not available if Split Arming is enabled.
System Triggers
Any Alarm Activation: Activates the specified channel during all alarm activations. The channel is restored
after disarm and at alarm cutoff and reset.
Burglary: Activates the specified channel during all burglary activations. The channel is restored
after disarm and at alarm cutoff and reset.
Fire: Activates the specified channel during all fire activations. The channel is restored after
disarm and at alarm cutoff and reset.
Panic: Activates the specified channel during all panic activations. The channel is restored
after disarm and at alarm cutoff and reset.
Silent Panic: Activates the specified channel during all silent panic activations. The channel is
restored after disarm and at alarm cutoff and reset.
Pre-Alarm: Activates the specified channel during pre-alarm. The channel is restored after disarm
or an activation.
- DESTINY 6100 1
- Software Revisions 4
- Table of Contents 5
- System Options and Times 6
- Central Station Features 6
- User Codes 7
- Control Channels 7
- Specifications 8
- Inserting the Cabinet Lock 11
- Mounting the Control Board 11
- To House 12
- From Phone 12
- Wiring Notes 13
- System Terminals 14
- X-10 Interface Cord 16
- Program Mode 18
- Locations and Values 18
- Automated Locations 18
- Exiting Program Mode 18
- Programming 18
- Quick Start 19
- System Input Overview 20
- Programming System Inputs 20
- System Setup Example 21
- Using This Manual: 22
- Program a Zone 23
- Zone Questions 23
- * Zone Type 24
- Zone Options 1 24
- Zone Options 2 24
- Hardware Device Types 25
- Predefined Zone Assignments 25
- Hardwire Inputs 26
- 5816 (MN) 5817 27
- Button Type Devices 28
- Button Functions 29
- Editing Zone Programming 30
- Deleting a Zone 30
- Smoke Verification 33
- Speaker (Bell) Supervision 34
- RF Jam Detection 34
- System Options - Group 1 36
- System Options - Group 2 36
- System Options - Group 3 36
- System Options - Group 4 37
- System Options - Group 5 37
- System Options - Group 6 37
- System Access Codes 37
- System Times 38
- Monitor Trouble Conditions 38
- Bypass Options 38
- Phone Access Options 39
- Event Memory Log 39
- Communicator Times 46
- Two-Way Voice Options 46
- Two-Way Digit Assignments 47
- Report Codes 49
- Dialer Options 51
- Communicator Diagnostics 51
- User Communicator Test 51
- Central Station Terms 52
- Key Function Values 56
- Keypad Option 56
- Keypad Functions 57
- TS16 Group 1 57
- TS16 Group 2 57
- Keypad Area Assignment 57
- User Code + Digit Functions 58
- Extended Monitor Times 58
- Vocabulary 59
- Keypad Function Terms 61
- User Code Options 65
- Disappearing Code Activations 65
- Assigning User Codes to Areas 65
- User Code Terms 66
- Automation Overview 67
- Automation Example 67
- Channel Activations 68
- Control Channel Options 1 69
- Control Channel Options 2 69
- Control Channel Options 3 69
- Control Channel Options 4 69
- Control Channel Locations 70
- System Triggers 71
- X-10 Options 71
- Output Control Assignments 72
- Chain Group Assignments 73
- Control Channel Terms 74
- ADEMCO LIMITED WARRANTY 84
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa AMX APEX Destiny 6100
(18 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji