AMX MAX-HT12T Instrukcja Obsługi Pobierz pdf (Strona 50)

MXD-430 4.3” X Series Wall/Flush Mount Touch Panel

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

MXD-430 Installation

The MXD-430 may be installed directly into a solid surface environment, using either solid surface screws or the

included locking tabs for different mounting options.

Once installed, the MXD-430 is contained within a clear outer housing known as the Backbox (FIG. 41). This Backbox

is removed before installing the device into a wall or when using the optional Rough-In Box accessory (FG039-19).

Power via Power Over Ethernet

Power for the MXD-430 is supplied via Power Over Ethernet (PoE), utilizing an AMX-certified, capacitive touch-

compliant PoE injector or other approved AMX PoE power source. The incoming PoE Ethernet cable should be

connected to the RJ45 port on the MXD-430 (FIG. 40).

Refer to A Note About Wall and Rack Installation on page 5 for important notes

on thermal concerns with Wall and Rack Installations.

FIG. 41 MXD-430 Backbox

Locking tab

Backbox

For typical mounting surfaces, such as drywall, use the locking tabs as the primary

method for securing the Backbox to the surface. For thin walls or solid surfaces, use

mounting screws (not included).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 61 62

Brak uwag

AMX MAX-HT12T Instrukcja Obsługi Strona 50