AMX MAX-HT12T Instrukcja Obsługi Pobierz pdf (Strona 39)

MXT/D-700 - 7" X Series Panels

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

Touch Panel Aspect Ratio

While the touch panel screen physical dimensions fall between 16:9 and 16:10, any incoming video stream can be scaled

to 16:9 if needed. This may lead to some letter boxing around the video in some cases.

MXD-700 Installation

Detailed specifications drawings for the MXD-700 are available to download from www.amx.com.

The MXD-700 may be installed directly into a solid surface environment, using either solid surface screws or the

included locking tabs for different mounting options. Once installed, the MXD-700 is contained within a clear outer

housing known as the Backbox (FIG. 30). This Backbox is removed to install the device into a wall or when using the

optional Rough-In Box accessory (FG039-18).

Power Via PoE

Power for the MXD-700 is supplied via PoE (Power Over Ethernet), utilizing an AMX-certified, capacitive touch-

compliant PoE injector or other approved AMX PoE power source.

The incoming Ethernet cable connects to the RJ45 port on the MXD-700 (see FIG. 30).

Installing the MXD-700 into a Wall

The MXD-700 comes with a clear plastic Backbox (designed to attach the panel to most standard wall materials. This

Backbox has two locking tabs (one on top and one on bottom) to help lock the Backbox to the wall.

These locking tabs are only extended AFTER the Backbox is inserted into the wall. (FIG. 31).

The MXD-700-P-NC (FG5968-28) and MXD-700-L-NC (FG5968-29) No Comm touch

panels do not have microphone capability. These otherwise have all of the

functionality of the MXD-700 panels.

Refer to A Note About Wall and Rack Installation on page 5 for important notes

on thermal concerns with Rack and Wall installations.

FIG. 30 MXD-700 Backbox

Locking tab

RJ45 cable clip

RJ45 Cable/Port

For typical mounting surfaces, such as drywall, use the locking tabs as the primary

method for securing the Backbox to the surface. For thin walls or solid surfaces, use

mounting screws (not included).

When installing the Backbox, make sure that the assembly is in the correct position

and in the correct place. Once the locking tabs are extended and locked into place,

removing the Backbox may be difficult without having access to the back of the wall

or causing damage to the wall.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 61 62

Brak uwag

AMX MAX-HT12T Instrukcja Obsługi Strona 39