AMX NXB-CCG-K Informacje Techniczne Pobierz pdf (Strona 86)

Lutron® integration protocol

OUTPUT Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Set (#) / Get (?) Zone Level 1 Level = 0 or 100.00

Fade

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Start Raising 2 None

Start Lowering 3 None

Stop Raising Lowering 4 None

Report Travel Time Remaining

17 Travel time in seconds: 0 – 255

Motor Jog Raise

18 None

Motor Jog Lower

19 None

Motor 4-Stage Jog Raise

20 None

Motor 4-Stage Jog Lower

21 None

NOTES

1. Setting the level to 0% will cause the output to travel in the Closed direction; setting the level to 100% will cause the

output to travel in the Open direction; setting any level from 1 – 99% will be ignored by the output. Querying its level will

report 0 or 100%, based on the last direction it moved.

2. Fade is not available for Shades because they move at a constant rate. The parameter must be entered, but is ignored.

3. Fractional seconds “SS.ss” will be rounded down to the nearest quarter-second. For example, if a delay time is speciﬁed

as 1.45 seconds, a value of 1.25 seconds will be used.

4. The delay time is optional. When not used, the system will use a zero-second delay. The minimum delay time is 0.25

seconds; the maximum delay time is 4 hours.

5. If the travel time of a motor is greater than 255 seconds, the unit will report 255 until the travel time drops below that

value.

6. Not supported in QS Standalone.

OUTPUT Command Format

Energi Savr NodeTM QS

for Motor Module (International) (continued)

OUTPUT Commands

Operation

Use “OUTPUT Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Command

Integration ID (example)

#OUTPUT, 3, Action Number, Parameters

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 143 144

Komentarze do niniejszej Instrukcji

Brak uwag

AMX NXB-CCG-K Informacje Techniczne Strona 86

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery AMX NXB-CCG-K