AMX NXB-CCG-K Informacje Techniczne Pobierz pdf (Strona 40)

Lutron® integration protocol

Clear Connect® Gateway System (continued)

Integration Access Points (continued)

Connection Information

Provides an Ethernet connection to communicate with external equipment.

Ethernet

Conﬁguring the control interface to communicate over a network takes not only knowledge of the

Clear Connect® Gateway System, but of networking as well. Installers with limited networking

knowledge are advised to contact a networking professional before attempting to connect a

control interface through a network. The information below will help an installer communicate the

control interface conﬁgurations to a network professional.

The installer will make any necessary changes to the control interface using the Integrated

Web Conﬁguration tool and the network professional can make any necessary changes to the

networking equipment.

Single Ethernet Port

• IEEE® 802.3 Auto-Sensing 10BaseT / 100BaseTX

• Supports MDI/MDIX auto-crossover (no crossover cable needed).

• Female 8P8C “Computer RJ-45” socket

• Green “Connect” LED, Amber “Activity” LED

• Use Cat 5 cabling or better

TCP / IP Settings

• DHCP (dynamic) or static conﬁguration <factory default = DHCP>

• IP Address: <static or dynamic conﬁguration>

• Subnet Mask: <static or dynamic conﬁguration>

• Gateway: <static or dynamic conﬁguration>

Protocols Used for Integration

• Raw socket (Telnet port)

• SSH

Server

• Up to 10 usernames can be created. Each username supports multiple simultaneous connections

• Used by software and/or third party equipment (i.e. touch screen)

• Limited to transferring ASCII characters

• Raw Socket port number is 23; can be changed in the Web Conﬁguration tool

• SSH port number is 22; cannot be changed

• Default Integration Login information

NXB-CCG / NXB-CCG-K:

– Login: amx

– Password: clearconnect

Continued on next page…

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 143 144

Brak uwag

AMX NXB-CCG-K Informacje Techniczne Strona 40