AMX NXB-CCG Dokumentacja Pobierz pdf (Strona 6)

NXB-CCG NetLinx ClearConnect Gateway

NXB-CCG NetLinx® Clear Connect™ Gateway

Product Specifications

NXB-CCG Specifications

Power Requirements: • Power Consumption: 600mA @ 5VDC, DC adapter included (5V DC, 2A).

• Surge Protection: To withstand surge voltages without damage or loss of

operation, in accordance with IEEE C62.41-1991 Recommended Practice

on Surge Voltages in Low-Voltage AC Power Circuits.

• Power Failure Memory: If power is interrupted, the NXB-CCG will return to

its previous state when power is restored.

Front Panel Components:

Power/Status LED: Displays power status and other system status indicators.

RF LED: Displays the Tx / Rx activity on the RF link.

Ethernet LED: Displays the connection status and Tx / Rx activity on the Ethernet link.

Rear Panel Components:

CAT5 Cable Port: Maximum cable length: 328 ft (100 m).

USB Cable Port: Manufacturer use only.

Reset Button: Press and hold for 20 seconds to restore the system to the Factory Default

settings.

Power Jack (to DC adapter) (IEC PELV / NECR Class 2).

Operating Environment: • 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing.

• Indoor use only.

ESD Protection: ESD protection to withstand electrostatic discharge without damage or

memory loss, in accordance with IEC 61000-4-2.

Communications: • The NXB-CCG communicates to other Clear Connect devices through RF.

• All devices (except wired accessory dimmers/switches) must be located

within 30 feet (9 m) of the NXB-CCG.

Auto Discovery: Supports the ZeroConf auto discovery protocol.

Dimensions (HWD):

• Without antenna: 1 1/8” x 2 5/8” x 4 7/16” (2.86 cm x 6.60 cm x 11.23 cm)

• With antenna: 6 1/2” x 2 5/8” x 4 7/16” (17.15 cm x 6.60 mm x 112.27 mm)

Weight:

0.3 lbs (136.08 g)

Certifications: • FCC FCC Title 47 Part 15 Subpart B and C

•IC

• cULus UL 60950-1

Included Accessories: • 5VDC Adapter (WA-10J05FU)

• CAT5 Suppression Ferrite

Other AMX Equipment: • CCD-F6AN-DV-WH, Clear Connect 6A Fluorescent Dimmer

(FG2606-12-WH)

• CCD-RD-WH, Clear Connect 120V Accessory Dimmer (FG2606-31-WH)

• CCD-RS-WH, Clear Connect 120V Accessory Switch (FG2606-32-WH)

• CCD-RS-277-WH, Clear Connect 277V Accessory Switch (FG2606-33-WH)

• CCD-VCRB-P-WH, Clear Connect Radio Powr SavrTM Ceiling Mount

Vacancy Sensor - CA. Only (FG2606-42-WH)

• CCD-6NA-WH Clear Connect Phase Adaptive Dimmer (FG2606-13-WH)

• CCD-15APS-1-WH, Clear Connect Switching Plug in Device - 15 A

Softswitch (FG2606-51-WH)

• CCD-W6BRL-WH, Clear Connect Wall Keypad - 6 button with Raise/Lower

(FG2606-61-WH)

• CCD-6D-WH, Clear Connect 600W Incandescent/MLV Dimmer

(FG2606-11-WH)

• CCD-8S-WH, Clear Connect 120/277V Switch (FG2606-21-WH)

• CCD-OCRB-P-WH, Clear Connect Radio Powr SavrTM Ceiling Mount

Occupancy/Vacancy Sensor (FG2606-41-WH)

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

AMX NXB-CCG Dokumentacja Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery AMX NXB-CCG