AMX Advanced Classroom Transmitter TXC-ACT Instrukcja Obsługi Strona 119
- Strona / 141
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Appendix C – Virtual NetLinx Master
119
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Note: The following procedure uses the most current version of Windows available at the time of publication.
To set a PC to Static IP Mode:
1.
From the Start menu on the desktop taskbar, select Control Panel / Network Sharing Center.
2. Click “Change adapter settings” (top left).
3. Right-click on Local Area Connection and select Properties.
The Local Area Connection Properties dialog box opens.
4. From the list of “This connection uses the following items” (see above), highlight Internet Protocol Version 4
(TCP/IPv4) and click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens.
5. Select “Use the following IP address” and enter 192.168.1.50 (or the IP range of the Enova DGX or Enova DVX).
6. Press the Tab key on your keyboard to auto-fill the Subnet mask field.
7. Click OK and click Close.
Important: When finished using the PC as a Virtual Master, change the setting in the dialog box shown in
Step 4 back to “Obtain an IP address automatically.”
Internet Protocol Properties dialog box
- Twisted Pair 1
- Transmitters/Receiver 1
- Contents 3
- ESD Warning 6
- Lithium Batteries Notice 9
- Trademark Notices 9
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Warnings and Cautions 10
- Applicability Notice 11
- Product Notes 11
- Product Compatibility Tables 12
- Multi-Format TX front view 14
- HDMI TX front view 14
- Multi-Format TX rear view 18
- HDMI TX rear view 19
- Receiver 22
- HDMI RX front view 22
- HDMI RX rear view 23
- Common Features/Functionality 25
- USB Port (Rear) 26
- Shielded Cat6, Cat6A, Cat7* 31
- qualified): 1 per module 32
- Audio Format 33
- Local Audio 35
- Specifications 35
- Installation and Setup 36
- Setup Information 37
- Custom EDID Settings 38
- Example B 40
- Example C 40
- Example D 40
- Example A 40
- Power Budget Calculation 42
- Avoid network loops 43
- #1 Toggle Settings 44
- Installation Options 44
- #2 Toggle Settings 44
- #3 Toggle Settings 45
- V Style mounting hardware 46
- DXLink LEDs 51
- Audio Type Precedence 52
- Control Cables 55
- HDMI RX – Applying Power 58
- IR Receiver cable (FG-IR03) 60
- ID Pushbutton Functions 61
- Network Configuration 64
- TCP/IP Address Configuration 65
- External Master Versions 65
- Factory Default Parameters 67
- Device IDs 68
- Using the ID Pushbutton 68
- Factory Parameters* 70
- Behavior” table below 72
- IRL File Transfers 73
- Transferring IRL Files 75
- Additional Documentation 77
- Additional IRL Information 77
- Overview 78
- Device Numbering and Ports 78
- Aspect Ratio Options 82
- VIDIN_PREF_EDID 85
- IR CHANNELs 88
- IR SEND_COMMANDs 88
- GET MODE 89
- SET MODE (IR command) 90
- USB SEND-COMMANDs (Receiver) 94
- FACTORYAV command 96
- SET TELNET PORT 97
- Troubleshooting 99
- Power Issues 100
- DXLink Connection Issues 101
- Network Setup Issues 102
- Technical Support 102
- DXLink Receiver 103
- Device numbers 103
- Enova DGX 32 103
- DXLink Transmitter 103
- Important Upgrade Information 104
- Firmware Versions 105
- Transferring KIT Files 106
- Telnet Username and Password 108
- Telnet Commands (continued) 110
- Master Connection Modes 116
- Windows Client Programs 117
- Linux Telnet Client 117
- Creating a Virtual Master 120
- Click to open the 120
- Communication Settings 120
- CONNECTION and press Enter 122
- HD-15 Connector Cable Pinout 124
- DVI Connector Pinout 125
- CEA (RGB Color Space): 130
- CVR (RGB Color Space): 131
- CVT (RGB Color Space): 132
- DMR (RGB Color Space): 133
- DMT (RGB Color Space): 133
- Applicability 134
- Remove jackscrew and washer 135
- Appendix H – EDID Programming 136
- DXLink Connection to PC 137
- EDID Programmer View 138
- Read Error Message 139
- AMX EDID Library 139
- 11/19/14 141
Powiązane produkty i podręczniki dla Odbiornik AMX Advanced Classroom Transmitter TXC-ACT
Odbiornik AMX UDM-RX02 Dokumentacja
(126 strony)
(126 strony)
Odbiornik AMX MX8 Instrukcja Użytkownika
(37 strony)
(37 strony)
Odbiornik AMX MX8 Instrukcja Obsługi
(22 strony)
(22 strony)
Odbiornik AMX MX16 Instrukcja Użytkownika
(2 strony)
(2 strony)
Odbiornik AMX MX8 Instrukcja Użytkownika
(2 strony)
(2 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji