AMX Advanced Classroom Transmitter TXC-ACT Dokumentacja Pobierz pdf (Strona 24)

V1 Port Description

Please remember the function of each port, which may help you to use the Naza-M efficiently.

Main Controller

For roll control (left/right)

For pitch control (front/back)

For throttle control

For rudder control

For Control Mode Switch

For gimbal pitch control

Or for gain tuning

For D-Bus (S-Bus compatible)

Or for gain tuning

Or for IOC switch

For voltage monitor (Connect with VU V-SEN port)

To #1 rotor

To #2 rotor

To #3 rotor

To #4 rotor

To #5 rotor

To #6 rotor

To gimbal roll servo

To gimbal pitch servo

LED

LED port, for LED wire connection from Versatile Unit

EXP.

GPS port, for GPS module wire connection.

(In three-pin ports, pins near the nicks are signal pins.)

Versatile Unit

V-SEN

V-SEN port: To the X3 port of the main controller, for monitoring battery voltage and supplying

power

 Orange wire (signal wire) output: ±3.3V

 Red wire (power wire) output: 4A@5V

LED

LED wire, to LED port of the main controller.

USB port: PC connection for configuration and firmware upgrades.

Optional GPS & Compass

Connect to the EXP. port.

1 2 ... 19 20 21 22 23 24 25 26 27

Brak uwag

AMX Advanced Classroom Transmitter TXC-ACT Dokumentacja Strona 24