AMX MSD-1001 Dokumentacja Pobierz pdf

Quick Start Guide

MSD-1001-L 10.1” Modero S Series

Wall Touch Panel

Overview

The Modero S Series

is a beautiful touch panel family sophisticated enough for

room control yet priced right for the most cost sensitive installations including

small huddle spaces and dedicated room scheduling. The MSD-1001-L 10.1”

Wall/Flush Mount Touch Panel (FG2265-01) features brilliant 24-bit color depth,

PoE connectivity, and streaming video.

Product Specifications

Note: Optimal performance requires use of one of the following AMX PoE power

supplies (not included):

• PS-POE-AF-TC, PoE Injector, 802.3AF Compliant (FG423-83)

• NXA-ENET8-2POE, Gigabit PoE Ethernet Switch (FG2178-63)

Note: AMX does not support the use of non-AMX power supplies.

Note: For more information on installation and configuration, as well as

complete specifications on this device, please refer to the MSD/T-701

Operation/Reference Guide, available at www.amx.com.

Panel Connectors and Wiring

FIG. 1 shows the connectors located on the back of the MSD-1001-L.

Power for the MSD-1001-L via Power Over Ethernet

Power for the MSD-1001-L is supplied via Power Over Ethernet (PoE), utilizing

an AMX-certified PoE injector such as the PS-POE-AF-TC PoE Injector

(FG423-83) or other approved AMX PoE power source. The incoming Ethernet

cable should be connected to the RJ-45 port on the MSD-1001-L.

Note: The Micro A/B USB port is used only for firmware uploads, as it is

inaccessible when the device is installed within its back box.

Installing the MSD-1001-L

The MSD-1001-L can be installed either directly into a solid surface

environment, using either solid surface screws or the included locking tabs for

different mounting options. For more information, please refer to the MSD/T-701

Operation/Reference Guide, available at www.amx.com.

Installing the MSD-1001-L into a wall

The MSD-1001-L is contained within a clear outer housing known as the back

box. The back box (FIG. 2) is designed to attach the panel to most standard wall

and solid surface materials. This back box has two locking tabs (one on the top

and one at the bottom) to help lock the back box to the wall. These locking tabs

are only extended AFTER the back box is inserted into the wall. Using the

locking tabs is highly recommended for standard mounting surfaces such as

walls. For thin walls and solid surfaces, use #4 mounting screws (not included).

WARNING: When installing the back box, make sure that the assembly is in the

correct position and in the correct place. Once the locking tabs are extended

and locked into place, removing the back box may be difficult without having

access to the back of the wall or causing damage to the wall.

Note: In order to guarantee a stable installation of the MSD-1001-L, the

thickness of the wall material must be a minimum of .50 inches (1.27cm) and a

maximum of .875 inches (2.22cm). The surface should also be smooth and flat.

WARNING: The maximum recommended torque to screw in the locking tabs on

the plastic back box is 5 IN-LB [56 N-CM]. Applying excessive torque while

tightening the tab screws, such as with powered screwdrivers, can strip out the

locking tabs or damage the plastic back box.

1. After ensuring proper placement, cut out the mounting surface. Use the

included mounting template (68-2265-03) or refer to the dimensions in the

MSD/T-701 Operation/Reference Guide, available from www.amx.com,

for more information.

CAUTION: Making sure the actual cutout opening is slightly smaller than the

provided dimensions is highly recommended. This action provides the installer

with a margin for error if the opening needs to be expanded. Too little wall

material removed is always better than too much.

2. Remove either the top or the bottom knockout from the back box,

depending upon the required installation. Thread the incoming wiring

through the hole in the rear of the back box.

3. Thread the incoming Ethernet wiring from their terminal locations through

the surface opening and through the access slot.

FIG. 1 MSD-1001-L

MSD-1001-L Specifications

Power: PoE (Power over Ethernet), 802.3af, class 0

Power Consumption: • Full-On: 14.5 W maximum

• Standby: 4.7 W

• Shutdown: 0.8 W

• Startup Inrush Current: Not Applicable due to PoE

standard

Operating Environment: • Operating Temperature: 32° F to 104° F (0° C to 40° C)

• Storage Temperature: 4° F to 140° F (-20° C to 60° C)

• Humidity Operating: 20% to 85% RH

• Humidity Storage: 5% to 85% RH

• Power (“Heat”) Dissipation: On: 27.3 BTU/hr, Standby:

10.9 BTU/hr

Dimensions (HWD):

With Back Box: 6.2" x 10.4" x 2.3"

(157 mm x 264 mm x 58 mm)

Weight:

• Without Back Box: 1.50 lbs (0.68 Kg)

• With Back Box: 1.95 lbs (0.88 Kg)

Certifications: • UL

• FCC Part 15 Class B

• C-Tick CISPR 22 Class B

• CE EN 55022 Class B and EN 55024

• CE EN 60950-1

• IC CISPR 22 Class B

• VCCI CISPR 22 Class B

• RoHS/WEEE compliant

Included Accessories: • MSD-1001-L Wall Mounting Template (68-2265-03)

Microphone

(Front)

(Rear)

RJ-45

Port

Sleep Button

Micro A/B

USB Port

FIG. 2 MSD-1001-L Back Box (Side View)

Knockout

MSD-1001-L

Back

Box

Locking

Tab

Knockout

1 2

Podsumowanie treści

Strona 1 - Quick Start Guide

Quick Start GuideMSD-1001-L 10.1” Modero S Series® Wall Touch PanelOverviewThe Modero S Series® is a beautiful touch panel family sophisticated enough

Strona 2 - Configuring the MSD-1001-L

Komentarze do niniejszej Instrukcji

Brak uwag

AMX MSD-1001 Dokumentacja

Przeglądaj online lub pobierz Dokumentacja dla Monitory z ekranem dotykowym AMX MSD-1001. AMX MSD-1001 Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Monitory z ekranem dotykowym AMX MSD-1001