AMX 68 Instrukcja Instalacji Pobierz pdf (Strona 14)

Programming Your Remote Controls

The alarm allows the user to add new remote controls in one step, delete lost or

stolen remote controls or rearrange the factory preset remote control functions.

All remote control programming features are accomplished by turning the

ignition key on (or starting the vehicle) and flicking the valet switch on and

off a preset number of times.

1. Remove the alarm from valet. Programming cannot be accessed while

the alarm is in the valet mode, indicated by the alarm LED on solid red.

2. Select the feature from the "Programming Table for Remote Controls."

Note the number of chirps.

3. Turn the ignition key to the "ON" position.

4. Within 10 seconds, begin flicking the valet switch on and off. The siren

will chirp one time each time you flick the switch on then off.

5. Continue flicking the valet switch on and off until you reach the

number of chirps associated with your chosen feature.

NOTE: Stop on the chirp.

6. Follow the "Secondary Action."

7. Turn the ignition key off.

8. Repeat steps 1-7 for any other feature you wish to program.

Pro gram ming Ta ble for Re mote Con trols

Fea ture

Fac tory

Set ting

# of

Chirps

Sec on dary Ac tion

Arm/Disarm/Remote

Panic

Channel 1 9

Press any remote control button you choose to operate

this feature. Siren will chirp once for confirmation.

Accessory (-) Output Channel 2 10

Press any remote control button you choose to operate

this feature. Siren will chirp twice for confirmation.

Silent Arm/Disarm Channel 3 11

Press any remote control button you choose to operate

this feature. Siren will chirp 3 times for confirmation.

All Channel Learn — 12

Press button #1. The siren will chirp 1 time. Remote

control will operate at factory preset order.

Instant Code

Deletion

— 13

Wait 3 seconds. The siren will chirp twice. All Remote

Controls are erased from memory.

Diablo

/AMX 68/AT-58 Installation Manual 3/31/99

1 2 ... 9 10 11 12 13 14 15

Komentarze do niniejszej Instrukcji

Brak uwag

AMX 68 Instrukcja Instalacji Strona 14

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa AMX 68