AMX AXU-MSP24 Instrukcja Użytkownika Pobierz pdf

Edwards Booster Power Supply

Manual

DEVELOPED BY

Edwards Company, Inc.

90 Fieldstone Court

Cheshire, CT 06410

(203) 699-3300

This manual and the products it describes are copyrighted by Edwards

Company, Inc. You may not reproduce, translate, transcribe, or transmit any part

of this manual without express, written permission from Edwards Company, Inc.

LIMITATION OF LIABILITY

This product has been designed to meet the requirements of NFPA Standard 72,

1996 Edition; Underwriters Laboratories, Inc., Standard 864, 7th Edition.

Installation in accordance with this manual, applicable codes, and the

instructions of the Authority Having Jurisdiction is mandatory. Edwards

Company, Inc. shall not under any circumstances be liable for any incidental or

consequential damages arising from loss of property or other damages or losses

owing to the failure of Edwards Company, Inc. products beyond the cost of repair

or replacement of any defective products. Edwards Company, Inc. reserves the

right to make product improvements and change product specifications at any

time.

While every precaution has been taken during the preparation of this manual to

ensure the accuracy of its contents, Edwards Company, Inc. assumes no

responsibility for errors or omissions.

FCC WARNING

This equipment can generate and radiate radio frequency energy. If this

equipment is not installed in accordance with this manual, it may cause

interference to radio communications. This equipment has been tested and

found to comply within the limits for Class A computing devices pursuant to

Subpart B of Part 15 of the FCC Rules. These rules are designed to provide

reasonable protection against such interference when this equipment is operated

in a commercial environment. Operation of this equipment is likely to cause

interference, in which case the user at his own expense, is required to take

whatever measures may be required to correct the interference.

DOCUMENT HISTORY: P/N 3100061

Date Revision Reason for change

FEB 2000 1.0 Initial release.

1 2 3 4 5 6 ... 35 36

Podsumowanie treści

Strona 1 - Edwards Booster Power Supply

Strona 2

8 Edwards Booster Power Supply ManualConnecting AC powerWARNING: Disconnect all power to the fire alarm control panelbefore installing or removing any

Strona 3 - Introduction

Edwards Booster Power Supply Manual 9Wiring NACsNOTES:Used for another Class B NAC circuit.Used to connect another input circuitor signaling device.Po

Strona 4 - Specifications

10 Edwards Booster Power Supply Manual[trouble.cdr]NCTROUBLECOMNOTB2To B oo st ertroublemonitoringdeviceTB4SW1Figure 10: Trouble relay contactsWiring

Strona 5 - Installing the enclosure

Edwards Booster Power Supply Manual 11Applications for the Booster Power SupplyFire AlarmControl PanelNACNACSENSE 1SENSE 2Inputs OutputsNAC1NAC2NAC3/A

Strona 6 - Setting DIP switch options

12 Edwards Booster Power Supply ManualFire AlarmControl PanelNACSENSE 1SENSE 1InputsInputsOutputsOutputsNAC1NAC1NAC2NAC2NAC3/AUX1NAC3/AUX1NAC4/AUX2NAC

Strona 7

Edwards Booster Power Supply Manual 13Battery calculation worksheetAuxiliary devicesNote: Only add auxiliary current if SW1-12 is OFF. (Auxiliary outp

Strona 8 - Figure 5: Jumpers

14 Edwards Booster Power Supply Manual24 Vdc NAC specificationsThe NAC cable must be a minimum 18 gauge. Distance limitsare determined using the maxim

Strona 9 - Routing power-limited wires

Edwards Booster Power Supply Manual 15Quick reference table (load vs. distance NAC (1.9 volt drop)Maximum distance to last appliance, in feet (meters)

Strona 10 - Connecting AC power

16 Edwards Booster Power Supply ManualCompatibility listsDevices manufactured by AmsecoModel DescriptionSL-315 12/24 Vdc UL 1971 StrobeSL-3 12/24 Vdc

Strona 11 - Wiring the trouble relay

Edwards Booster Power Supply Manual 17Devices manufactured by EdwardsModel Description97DEXR-GW Strobe - Explosionproof, 24Vdc2440PS-110R/W Strobe - 1

Strona 12 - Wiring the battery terminals

ContentIntroduction • 1Models covered • 1Description • 1Specifications • 2LEDs • 2Installing the enclosure • 3Setting DIP switch options • 4Setting ju

Strona 13 - [APP-03.CDR]

18 Edwards Booster Power Supply ManualDevices manufactured by EdwardsModel Description2452THPS-110R Horn w/Strobe - 110cd Synchronized, 24 Vdc - Red24

Strona 14 - [APP-04.CDR]

Edwards Booster Power Supply Manual 19Devices manufactured by EdwardsModel Description2457CPS-15W Chime w/Strobe - 15cd Synchronized, 24 Vdc - White24

Strona 15 - Battery calculation worksheet

20 Edwards Booster Power Supply ManualDevices manufactured by EdwardsModel Description5520D-G1 Horn/Siren - Duotronic, 24Vdc5522D-AW Horn - Explosionp

Strona 16 - 24 Vdc NAC specifications

Edwards Booster Power Supply Manual 21Devices Manufactured by FaradayModel Description2700B-E-(*)-24-DC 24 Vdc non-synchronized strobe2700B-G-(*)-24-D

Strona 17

22 Edwards Booster Power Supply ManualDevices Manufactured by FaradayModel Description2884B-Y-(*)-24-DC 8 Tone 24 Vdc horn sync strobe2884B-L-(*)-24-D

Strona 18 - Compatibility lists

Edwards Booster Power Supply Manual 23Devices Manufactured by FaradayModel Description5398B-J-4-24-DC 24 Vdc Electronic Chime Strobe5398B-T-4-24-DC 24

Strona 19 - Model Description

24 Edwards Booster Power Supply ManualDevices Manufactured by FaradayModel Description6238B-G-4-24-DC 24 Vdc Mechanical Horn Strobe6238B-R-4-24-DC 24

Strona 20

Edwards Booster Power Supply Manual 25Devices Manufactured by FaradayModel Description6255B-M-(*)-24-DC 24 Vdc Weatherproof Mechanical Horn sync Strob

Strona 21

26 Edwards Booster Power Supply ManualDevices Manufactured by FaradayModel Description6247 Electron-Mechanical Horn/Strobe6248 Electron-Mechanical Hor

Strona 22

Edwards Booster Power Supply Manual 27Devices Manufactured by GentexModel DescriptionGX90S-4-15/75-W 24 Vdc Horn StrobeGX90S--415/75-Z 24 Vdc Horn Str

Strona 23

Edwards Booster Power Supply Manual 1IntroductionModels coveredCatalog number DescriptionEBPS6 6.5 Amp Booster Power SupplyEBPS6/220 6.5 Amp Booster P

Strona 24

28 Edwards Booster Power Supply ManualDevices Manufactured by GentexModel DescriptionGMS24-30/75 24 Vdc Electro-Mechanical Horn StrobeGMS24-60 24 Vdc

Strona 25

Edwards Booster Power Supply Manual 29Devices Manufactured by System SensorModel DescriptionPC24177(W) 24 Vdc Ceiling mount horn StrobeMDL(W) 24 Vdc S

Strona 26

30 Edwards Booster Power Supply ManualDevices Manufactured by WheelockModel Description7002T-12\24-W-FR Horn StrobeAES-DL1-R Multitone HornAES-EL1-R M

Strona 27

Edwards Booster Power Supply Manual 31Devices Manufactured by WheelockModel DescriptionCH-DF1-LS-24 Chime StrobeCH-DF1-MS-24 Chime StrobeCH-DF1-IS-24

Strona 28

32 Edwards Booster Power Supply ManualDevices Manufactured by WheelockModel DescriptionMS1-24-VFR Remote StrobeMS3-24-VFR Remote StrobeMSP-24-HFR Remo

Strona 29

Edwards Booster Power Supply Manual 33Devices Manufactured by WheelockModel DescriptionRSP-24110-HFR StrobeSL-24-VFR Synchronized Remote StrobeSL1-24-

Strona 30

34 Edwards Booster Power Supply Manual

Strona 31

2 Edwards Booster Power Supply ManualSpecificationsAC line voltage:6.5 amp Booster10 amp Booster120/220/240 Vac (50/60 Hz) 250 watts120/220/240 Vac (5

Strona 32

Edwards Booster Power Supply Manual 3Installing the enclosureNote: Be sure to follow all applicable national (NFPA 72) andlocal fire alarm codes and s

Strona 33

4 Edwards Booster Power Supply ManualSetting DIP switch optionsThe 12-position DIP switch (SW1) configures NAC options, ACpower loss, auxiliary output

Strona 34

Edwards Booster Power Supply Manual 5SW1-6/7/8 (RATE): NAC output rateSW1-6 SW1-7 SW1-8 DescriptionOff Off Off All NACs follow sense inputOn Off Off N

Strona 35

6 Edwards Booster Power Supply ManualSetting jumpers for NAC configurationJP1 and JP2 select Class A or Class B NAC wiringconfiguration. Both jumpers

Strona 36

Edwards Booster Power Supply Manual 7Wiring the Booster Power SupplyRouting power-limited wiresTo avoid noise, keep input wiring isolated from high cu