AMX AMX78 Instrukcja Instalacji

FRONT COVER

Hood/Trunk Pin Switch1. Locate the vehicle hood and/or trunk pin switch that show ground whenthe hood or trunk is open only.2. Connect the alarm modul

Door Lock/UnlockICAUTION : Be sure to verify the type of door lock system you areworking with. Some types of door lock systems require optionalrelays,

10Manual

11Manual

Programmable FeaturesAll system and remote control programmable features are accomplished byturning the ignition key to the “ON” position or starting

Programming Table for Alarm FeaturesFeatureFactorySetting# ofChirpsSecondary ActionActive/Passive Arming Passive ON 4Wait 3 seconds, the siren chirps

Programming Table for Remote ControlsFeatureFactorySetting# ofChirpsSecondary ActionArm/Disarm/RemotePanicChannel 1ARM/DISARMBUTTON12Press the ARM/DIS

Manual - Inside Front Cover (Blank)

Table of ContentsImportant Information ... 2Recommended Installation Tools ... 2Recommended Procecures ...

Important InformationRecommended Installation ToolsVoltmeterWire StrippersElectric Drill & BitsPhillips Screw DriverConvoluted Tubing *Solder Gun

Wiring Diagram3AMX78(3) Installation Manual - Revised 0799

14 Pin Con nec torWire Color De scrip tionRED/WHITE Parking Light Polarity (+) or (-) SelectRED/BLACK Parking Light Output(s) - 2 Wires for European M

Installation ProceduresControl Unit1. Select a location under the dash that will allow you to use the tie wraps tosecurely fasten the control unit.2.

Valet Switch1. Discuss placement with the owner.2. Choose a location for the valet switch that is hidden, but convenient forthe owner to access.3. Dri

Parking Lights1. If the parking lights are positive trigger, connect the RED/WHITE wire tothe battery positive (+) terminal through the 20 amp fuse.NO