
Line: 105 dB @ 10 dBV, AES17
AMP: < 0.15% @ 8 Ohms, 20 Watts, 20 Hz to 20 kHz
Line: 0.003% @ 0 dBV, 1 kHz
Independent EQ, Volume and Balance control per
output
Microphone Input Connections
(2) 3.5mm 3-pin captive-wire MIC connectors;
supports up to two mono microphones, unbalanced or
balanced audio
Microphone Input Level (Maximum)
Microphone Input Format Support
Line or Mic level, balanced or unbalanced audio
Microphone Input Impedance
3.5 kOhms, accepts 60 to 600 Ohms sources
-24dB to +89dB, 1dB steps
Microphone Input Equalizer
3-band parametric EQ with variable center frequency,
filter type and Q
Center Frequency: 20 to 20K Hz
EQ Gain per Band: -12 to +12 dB
Q per band: 0.1 to 20
Filter Types: Bell, Base Shelving, Treble Shelving, Low
Pass, High Pass, Band Pass, Band Stop
Microphone Input Compression
Independent Compression per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Compression Ratio: 1 to 20
Threshold: -60 to 0 dB
Independent Gating per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Depth: 0 to 20 dB
Hold Off: 0 to 2000 ms
Threshold: -60 to 0 dB
Independent Limiting per Microphone
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Threshold: -60 to 0 dB
Independent Ducking per each of 3 audio paths
Attack: 1 to 2000 ms
Release: 10 to 5000 ms
Attenuation: 0 to 20 dB
Hold Off: 0 to 4000 ms
Threshold: -60 to 0 dB
Phantom Power: switchable 48V to each microphone
@ 8 mA total
(1) S/PDIF output; mirrors either of the 4 analog audio
outputs or 4 HDMI outputs (each mirrored DXLink
output passes S/PDIF if sent to its associated HDMI
output)
Output can mirror any of the 4 analog audio outputs as
stereo digital audio, or L-PCM, Dolby Digital and DTS
audio being passed-thru to any of the 4 HDMI outputs
For a more detailed pictorial drawing please visit: http://www.amx.com/products/DVX-3156HD.asp
Komentarze do niniejszej Instrukcji